Qualities and uses of Calm TSE (zinc based)
Qualities and uses of Balance TSE (CO2 based)
Qualities and uses of Cleanse TSE (copper based)
Qualities and uses of Vitality TSE (iron based)
Vitality TSE may act as a trigger for increased energy balance. In our model it corresponds with the circulatory system and blood.
It is recommended that Vitality TSE not be used by people who have been experiencing cancer symptoms.
This is because there could be a risk that an extra package of energy being released in the body could also support the cancer cells.
Qualities and uses of Mineral TSE (K, Mg, Ca)
Mineral TSE contains the fields of Potassium, Magnesium, Calcium.
Calcium is generally considered to support the immune system and bone health.
Potassium is generally considered to support blood pressure, nervous system and muscles.
Magnesium is generally considered to support muscle, nerve, heart and immune system function.
Qualities and uses of Shungite TSE
Drinking Water: immerse UN-OPENED in any source of water and the information fields may be transferred to the water for your benefit, allow approx 1hr to process.
User Guide & Instructions
We are currently aware of the following contra-indications for both the WSU Version 1 ( WSU V1) and WSU Version 2 ( WSU V2):
- Metal implants and pins.
- Serious mental illnesses such as schizophrenia.
If anyone who would be using the WSU V1/V2 has any of these, please contact us prior to renting so we can provide you with more detailed information. We can offer you a same-cost alternative that does not have these contra-indication problems, but this is not currently available online.
Please pay close attention to the information herein regards preparing your location space. It’s also highly recommended to utilise a dowser/geomancer to test your proposed location for the presence of any geopathic stress spots which may adversely affect the balance and proper functioning of your Wholeness Support Unit. Depending on your location we may be able to recommend a qualified dowser/geomancer that’s familiar with our technology and its unique requirements. Otherwise we can advise you regards finding a qualified dowser/geomancer in your area.
IMPORTANT: Please e-sign the ‘Purchase & Use Agreement’ or Rental Agreement’ if you haven’t already so that we can ship your system to you. Directly after you place your order we will send you an email with an e-sign request for this document. This will also activate your hardware warranty. It also confirms to us you’re aware that to optimise your experience of the Wholeness Support Unit system, your site location should be properly assessed and prepared before use. We strongly encourage this step because it usually makes a significant difference in the benefits that you can possibly receive while using your Orynoco Wholeness Support Unit.
WSU Version 2 Assembly
WSU VERSION 2: you can assemble your Wholeness Support Unit using the step by step instructions in the video below. This is a rather straight forward and fairly easy to understand system to assemble. We therefore believe that the assembly video below will be all that you will need to get you going. If you happen to need further assistance please contact us.
WSU Version 1 Assembly
WSU VERSION 1: you can assemble and connect your Wholeness Support Unit cables and power supply using the step by step instructions in the video below. Additionally, for this version which is a bit more complex to assemble due to the various cables which need to be connected properly, we’ve provided the Assembly Assistance Diagrams at the end of this webpage.
Conditioning Your Environment
Even if you won’t be starting your sessions right away we recommend you setup your unit as soon as your space has been prepared. This is because when your unit is setup and energized, a healthy and highly beneficial plasma energy field will permeate your entire environment. You may or may not sense its presence, but it will be there regardless to beneficially support you even when you’re not doing sessions.
Preparing Your Body Prior to Sessions
If you are new to using a Wholeness Support Unit, please begin your process by drinking TSE water for 3 to 7 days prior to starting your sessions. This will help balance your body’s energy fields and your mind and emotions to better prepare you for your first sessions in the unit. This helps you to be able to receive many more of the benefits which may be available to you from your new Wholeness Support Unit.
Charging & Using Your TSE Drinking Water
TSE Charged Water = water informed or charged by placing a sealed vial of TSE next to or in your drinking water.
Place the Transition State Elements (TSE) vial(s) that are enclosed into a glass dispenser (e.g. a Kilner 5L drinks dispenser) filled with clean water such as Volvic water or filtered tap water. Allow the vial(s) of TSE time to charge the water. This can take several hours. Your TSE Charged Water be used after only 2 hours, but it will have a stronger charge and be more effective if left for up to 8 hours.
Drink 30-50ml of your TSE Charged Water at least three times a day. It’s quite important to drink some of your TSE water before you go to sleep each night. You can also add it to your tea and coffee if you wish. You can drink as much TSE Charged Water as you like. You can even add some to your bath, laundry and cooking too. You can also water your plants with the TSE Charged Water. Your dogs, cats and other pets will love it as well.
We recommend adding it into all of the water that you use every day so that a healthy field can more completely permeate your entire environment as much as possible. After 3-7 days of drinking TSE Charged Water you will be ready to begin your first sessions in your new Wholeness Support Unit.
Orynoco Wholeness Support Unit Session Guidelines
CAUTION: people who have a pacemaker, metal implants or metal joint replacements CANNOT use the Orynoco Wholeness Support Unit.
Put on some of your favourite music, light some candles, oils or incense as you prefer. A typical session in the Wholeness Support Unit lasts 15-40 minutes. It’s best to start with shorter duration sessions to begin with and work up.
Sit on a comfortable chair positioned between the 4 tripods. Remove your shoes so you can sit with your feet grounded on the floor and sit peacefully. You could even read a good book during your sessions. It’s important that you relax and not stress about anything. Just let your Wholeness Support Unit do its job!
If you feel uncomfortable take a break and try again later. If you feel well and great, you can spend a longer time in the unit and repeat the session again after a few hours. Either way, it’s important to do a session before you go to sleep. You may feel sleepy during or after a session, in which case just go have a good rest.
You can repeat sessions daily if you wish and you’re not feeling any adverse reactions. If you are limited on time or have some mild reactions then do sessions just 3 times a week.
You can follow this preparation pattern initially for about 2-3 weeks, then review your progress. Keeping a journal of what you are experiencing can be quite helpful for the purpose of review. Keep records in your journal of how you feel each day, what’s changing in you, and so forth.
Sometimes re-balancing can feel odd or uncomfortable. This is sort of like moving into a wonderful new home where you like the new space, but there’s a period of dis-comfort while you’re getting used to the new home space. Be patient with yourself and trust in the process.
Mankind has used natural products to maintain wholeness and vitality since time immemorial. The informational fields imparted by the Wholeness Support Unit and the Transition State Elements (TSE) are entirely natural. They may be of help to you in achieving greater energetic balance, peace and wholeness at all levels of a being, be it human or animal.
Remember always that your new Wholeness Support Unit is NOT a medical device. The usage guidance provided above is not medical advice. The use of your Orynoco Wholeness Support Unit does not replace conventional medical treatments and/or care. The Transition State Elements (TSE) are not medicines. Our products do not diagnose, cure or treat any diseases. If you have any sort of medical or health condition you should immediately seek the help and care of a licensed doctor or health care professional.
WSU VERSION 1
ASSEMBLY ASSISTANCE DIAGRAMS
WSU VERSION 2 BASICS
When you sit in the space that exists between the tripods, these information fields will flow to find balance with your own subtle energy fields. In this way they can replenish information that you need. Missing or corrupted information is the underlying cause of most imbalances. Therefore, rejuvenating your subtle life force energy and it’s associated information fields helps restore your state of balance.
The four tripods are adjustable so that their heights can be set to suit the setting of a bed, chair meditation cushion or other seating/lying arrangement. The reactor heads are attached to the tripods with mounting brackets. The mounting brackets are adjustable to enable the heads to be tilted for various adjustments of field overlap. These various angles of overlap can produce considerably different results and allow for fine tuning the system to each individuals needs. There is no set formula for determining the angles the reactor heads should be set at. For starting out we do recommend having the heads pointing mostly upwards versus being angled towards you. The energy is less intense this way.
Each reactor head contains four mounted superoxide-coated copper coils. Each coil carries a blend of information fields derived from being further coated with various types of TSE. Together these build a field strength gradient relative to one another, thereby enabling a dynamic flow of subtle life force energy fields. The reference field set up by all four reactor heads can then respond to the needs of the body or living organism positioned in the space at the centre of the tripods with their reactor heads mounted.
Images for Version 1 Used Below
This is done for demonstrative purposes because the details of the reactor heads cannot be seen with their protective acrylic cylinders installed. Please also note that because these images depict the WSU Version 1 below the small perspex quantum antenna unit is not being shown. This is, however, not instrumental to understanding how the subtle life force information fields are created in the reactor heads.
All of our information for the Wholeness Support Unit (WSU) Version 1 can be accessed in the PDF download that we’ve made available to the right (or below on mobile).
Conscious Tech is about the interface between our conscious mind (intent) and the Quantum Field. We are constantly connected to the Quantum Field along with our subconscious which specifically allows us to receive and transmit billions of pieces of information throughout the day without needing to focus on a particular task.
How often have we arrived at a destination without remembering the journey in detail?
An essential part of the Orynoco Conscious Tech production includes preparing copper with a superoxide coating. During this preparation and at post production stage the layers are infused with multiple information fields. Each tiny irregular piece of superoxide coated copper then has its own qualities and when combined a larger field of accessible information is generated.
Applying our conscious intent to the generated field will produce a response. Setting the intent to re-balance our energetic fields to the most beneficial, optimum effect will connect us with the information fields and so the process is stimulated and initiated, thereby amplifying the effect of the field.
Orynoco has combined the multi-layered superoxide coated copper pieces into a versatile fabric loop that looks similar to a yoga belt.
We call this a Quantum Loop.
Using the Quantum Loop (QL)
Our experiments have shown that the quality of the space inside the shape the loop creates will change as the boundary is redefined.
Circles provide a great space for relaxation and going deep inside oneself. They provoke a very calming response from the user, which can occur in a standing or sitting position. This shape is the most versatile all-rounder. Ideal for post yoga relaxing, meditation, using with children and for taking time out to de-stress at any point during the day. Regular use produces response times varying from a few minutes or less, allowing the user to continue and increase the intensity over anything from 5 to 60 minutes.
Squares and rectangles provoke a very grounding effect in the electrical energy of the body. Ideal for use when completing Chi Kung or similar single position energy and physical workouts.
Triangles produce a much more energetic field for working with stronger energetic and physical stances or shaking.
Merkaba can be made using 2 Quantum Loops – producing a cosmic field for deeper meditations or experiences.
USING GEOMETRICS WITH YOUR QUANTUM LOOP
The Quantum Loop can also be used to focus information fields on a particular point of the body such as a knee or elbow injury. Our experiences show the Loop re-balances the natural energetic fields allowing the body to use additional, supportive information. This is not always an instant process but rather one that needs application and intent. The stronger the focus the quicker the balancing. Many people have used the Loop on problem areas overnight with great effect.
Wrap It around any part of your body, and wear it during the day or night. The irregular spacings between the encased pieces of copper will create a dynamic field flow which will activate movement of energy within the body.
Animals and pets respond very well to the Quantum Loop. They can access the information fields easily without any mental resistance. The Loop can be used to wrap round an injured area or placed in a circle around them.
The conscious intent expressed by the user is far more powerful than we can imagine. Use your intuition and creativity with the Loop it is an incredibly versatile tool that you can travel with and use anywhere.
About Your Life Force Energy Pendant
Your Life Force Energy Pendant necklace is a unique fusion of science and art… practicality and beauty. At the core of your pendant is a Transition State Element (TSE) which can interface with your energy fields and help to rebalance them. The TSE acts like a bridge between the physical and non-physical realms to help make these vital and necessary life force energies and information much more available to you, the wearer. These effects can be greatly enhanced if you focus and apply your intention on the desired outcome. In this way you consciously interact with and become proactive in your own process. That is why we call this technology Conscious Tech… it encourages you to use it in a highly conscious manner. You are then rewarded with better results for doing so.
Your stylish and unique handmade Life Force Energy pendant radiates a vital life force energy and subtle energy information fields to help support your wholeness, balance, vitality and rejuvenation. This pendant therefore helps you to maintain a proper subtle energy environment rather effortlessly.
As we’ve related, your pendant is conscious technology. We will therefore emphasise again how important your intention and attention are as keys to eliciting a more beneficial, fulfilling, effective and meaningful interaction with the information conveyed by the life force energy fields of the TSE’s used in your pendant. This same intention/attention principle is, of course, ubiquitous to the universe as a whole. However, the transition states of the elements involved act as a bridge between the physical and non-physical realms. This bridge of light helps make these life force energies and information fields much more easily available to living systems.
Using Your Life Force Energy Pendant
When you first get your Life Force Energy Pendant you can of course just unbox it and wear it as you would with any bit of jewellery. However, because this is actually a Conscious Tech Life Force Energy Pendant, we highly recommend that you begin more slowly, deliberately and consciously in order to establish deeper conscious intentions and connections with its field of energetic activity. Doing so will allow you to reap many more benefits over time, and is thus well worth the small amount of extra time and effort. Here are some suggestions we have to offer for how you might be able to go about this in a more conscious manner.
- Do a short ritual with your pendant to say hello and welcome it into your life force energy space.
- Consider whether giving the Being that your pendant represents a ‘name’ might be beneficial for you. Each Life Force Energy Pendant is in essence a type of living being. By giving it a name you will be empowered to better communicate with your Pendant-Being, and this can be quite helpful. It also lends a more personal touch to your interactions with your pendant, and this helps to strengthen the subtle energy connections being formed.
- Spend some time meditating with the pendant in your hands. Ask it to help you get clear as to the initial intentions you wish to have it help you achieve. You can also use this same process anytime that you feel the need to update or change your intentions.
- Endeavour to get to the point whereby you have your intentions clearly identified. Then whittle them down to their purest essence. Keep it simple with only one highly focused goal at a time.
- Now sit and meditate for a short bit with your pendant in your hands and communicate to it your clear, simple and highly focused intention. Ask your Pendant-Being to help you achieve that intention.
- Now you’re ready to wear your Life Force Pendant around your neck so it hangs on your chest.
- Keep your clearly defined intention in mind as continually as you can. Learn to put your intention on the ‘back channel’ of your mind where the negative chatter usually occurs that so your intention replaces that chatter.
- It can be helpful to keep a diary of your daily progress towards the goal that your intention represents. This way you can review what you’ve written every so often. In doing so, you’ll be amazed at what insights and revelations come to you about your situation. Often times a whole new intention will be formed of these insights, and one by one the unfolding sequence of intentions eventually forms a strand of pearls that leads you to your ultimate goal!
The potential for growing plants and crops by creating an optimised energetic environment around them is immense with potential for enhanced vitality, mineral content, yields, and a reduction in pests.
We believe that the Orynoco Agricultural Reactors naturally produce a flow of life force energy and information fields between themselves and the 3 nature realms of soil, plant and atmosphere.
The main TSE (Transition State Elements) used in our reactors are related to the elements of Carbon and Oxygen (CO2), Zinc (ZnO), Iron (CH3), and Magnesium. These are names that we relate to as elements. However, on another level of reality they refer to different field strengths of life force energy and/or natural information fields.
We propose a mechanism of action whereby a natural dynamic may be set up by the TSE materials which the reactors contain. These energy flows should then be able to change the field strength environment around a plant, providing relevant life force energy and information for growth, stabilising temperatures, and controlling pests. When a plant is happy and healthy it does not ‘invite’ natures way of recycling it, which is through pests and pathogens.
REACTOR TYPES AND SPECS
There are three basic reactor types as shown below. The first two types have both an inner and outer chamber, each with a different type of TSE within them. The third reactor type has only a single chamber.
The first type of reactor has two antenna, one of which gets inserted into the ground and the other which then projects up into the air. The second reactor has only one antenna which gets inserted into the ground. The third reactor type has no antenna and gets suspended in the air 1-4 meters above the ground level. This third reactor should be suspended in the air somewhere in the general vicinity of where the other two reactors are located
NOTE: we are currently planning on conducting further research into what types of reactor setups, placements and configurations will be optimal for various agricultural purposes. First become familiar with the Agricultural Reactors by using whichever of the 9 Reactor Setups we outline below that make most sense for you. You can then be an extended part of our research team by simply using your Agricultural Reactors. You would do this by taking careful notes as what you've done. We'd particularly be interested in knowing the following:
- The type of crop(s) you were raising.
- The type of soil you have.
- The reactor setup(s) you used (see below).
- The distance bewteen each of the reactors in your setup(s).
- A drawing denoting the geometric configuration your reactors were placed in.
- The height you suspended your Reactor Type 3 above the ground, if one was used.
- Any unusual criteria that may have affected your results other than the reactors.
- Your crop results in terms of yields above/below normal.
- Your operational results regards the need to water, add nutrients to the soil and control pests.
- Your overall rating on a scale of 1-10 of how well the Agricultural Reactors Setup you used worked for you.
Below you'll find photos and more specs for each of the three reactors we offer as part of this system.
REACTOR SETUP & LAYOUT RECOMMENDATIONS
Below you will find 9 separate diagrams. Each of them visually outlines one of our recommended reactor layout configurations. The TSE combinations and configurations shown are important to the effectiveness of each of the 9 setups shown. We strongly recommend that you work with these 9 setups before venturing into experimenting with other possibilities. Doing so wil give you a better sense of what you should expect from a decent setup. Once you know what our setups can do for your crops and plants, you’ll be able to then tell if any variations on these setups you may come up with are any better.
If you have any questions about how to setup these layouts we’ve provided please contact us for support and assistance.
FURTHER INFORMATION & RECOMMENDATIONS
The agricultural reactors consist of nested acrylic balls containing different types of TSE in them. In each pair the contents are alternated… e.g the TSE in the Reactor Type 1 central ball is the same type as that in Reactor Type 2 in the outer ball. We believe that this configuration creates a dynamic flow of life force energy and information between the two reactors.
Plants are 42-45% Carbon, 45% Oxygen, 6% Hydrogen and 0.1-0.6% Nitrogen, (total c.96%). It therefore stand to reason that the Carbon and Oxygen life force information fields may be able to directly interact with and bring balance to the primary systems in a plant. We have generally obeserved that the aerial parts of a plant tend to respond to the Co2/ZnO TSE (connects with air and light elements), whereas the root parts respond better to the CH3 or Nitrogen TSE. You can thus plan how you add additional life force energy and information connections into your agricultural operations based in this general guidance.
The life force information fields themselves aren’t articially generated. They instead naturally radiate from the Transition State Elements which are in a condition whereby their life force information fields appear to be quite readily bio-available. These life force fields convey the information that characterizes the particular TSEs that is being used. Each type of TSE has it’s own unique life force information field.
The way to assess the effects of the reactors and any other applications of the TSE life force infomration fields you may use, is to observe any changes in the way you need to minister to your plants/crops, and any change in growth patterns, etc.
It’s also useful to use water from your water butts and a manual sprayer that has been treated this way so that even more of these vital life force energy connections are made.
Cocoon Info: Obtain, Setup & Use
Meditation • Wholeness • Relaxation • Folding
Below you’ll find information on using what we call a Cocoon. This includes guidance on how to set it up and charge it, and some of the ways you can use it for the benefit of yourself, your family and friends. The PDF download has all of this same information in it for you as well
Where To Get Your Cocoon
If you are in our delivery area you can purchase a basic popup type of Cocoon in our Shop. Otherwise you can obtain ready made popup Cocoons on Amazon or Ebay.
If you wish to build your own frame to have something like the Pyramid or the Tubular Drape Cocoons we have shown , you will need to obtain the mosquito net mesh that has to be placed over and fastened to whatever frame you make, or have made. Again, you can obtain this on Amazon or Ebay.
Choose materials that are all natural fibres whenever possible, but your cocoon experiences will still be effective even if you must use man made fibres.
Cocoon Setup & Preparations
Additional Items Needed:
- Cocoon (our Cocoons come with a Vitalising Spray (grey bottle option) that has (1) 3ml Vial of TSE)
- Some Transition State Elements (TSE)
- A spray bottle (for spraying the Cocoon with water charged/treated by TSE).
Location: it’s best when possible to be out in nature in the shade shade when it’s not windy. However, a nicely prepared indoor space with your favourite relaxing music is also good.
Prepare Water for Cocoon Spraying: this can be either tap water or distilled but a more potent application can be achieved using distilled water. Charge for at least 30 minutes prior to application… charging consists of placing the TSE, in its container, either in the immediate proximity of the water container or directly inside it. We’re currently running tests to see if a longer exposure creates a more potent mix and will advise on this in due course. Watch the video below for a demo on charging your water. You will need to choose one of the types of TSE to use from your TSE collection for this purpose. Here are there qualities, and to start out with we would recommend either the ZnO or the CO2 types, and we include a blend of these in the TSE that comes as part of the Vitalising Spray product you get with your Cocoon when you purchase it from us.
- CO2 – rebalancing
- Zinc – relaxing
- Copper – cleaning
- Shungite – clearing (EMF for example)
- Iron – more invigorating
Preparing Your Cocoon
Once your water is charged, spray your charged water water on the whole of the cocoon material allowing water to spray through the material. Hold an intent to create a charged field within the cocoon as you spray. On the popup cocoons spray them with the door zipped shut. Then you can open it and make up your relaxation mattress or cushions to suit yourself. Re-spray the access door once your inside and have it zipped close again.
The cocoon material is comprised of myriads of cross-fibre connections. In energetic terms the cross is a point of energy and therefore multiple crosses ramp up the value of the TSE water as an energetic information field. The user is thus also breathing in the charged field as well as ‘bathing’ in it. TSE water taken into the body via the lungs is a great way to achieve results.
Watch the video below for a demonstration on how to spray your cocoon. If you have two Quantum Loops you can also add them around the cocoon as shown in the video, but they are not required by any means.
A Quantum Loop can also be used to charge the water you use to spray you cocoon with. Simply wrap the Quantum Loop around your water container ( preferably glass) and leave it for at least an hour. The water will then be ready for spraying your cocoon!
Now that your cocoon is setup and prepared for use you can begin your session in it.
We recommend that your first session be approximately 20 minutes long. However, if you’re a regular energy worker a 30-45 minute session may be manageable and appropriate depending on how you’re guided. We ultimately recommend for everyone to use their own inner guidance system to determine their session lengths and frequency.
During your session the field that has been created inside the cocoon acts as a facilitator. It will interface with you and your intent. As a result you are the driver of the process and you must be willing to take full responsibility for your session and its results or you will be somewhat limited regards what may be possible.
Peoples experiences in the cocoons have varied greatly. They have ranged from simply falling asleep until the end of their session, to experiencing sensory changes (smell sound and movement), to having deeply felt connections with loved ones and/or other beings. Each person’s experience is always going to be totally unique unto them. There are therefore no restrictions here except that as is usually sensible, don’t do too much in the first few sessions. Wait until you have adjusted to the space to spend more delightful time in your cocoon.
Allow time after your session to relax and ground yourself before moving on into the rest of your day.
Many people have felt the benefits of the cocoon field immediately and have then decided to quickly incorporate the cocoon into their sleeping arrangements either for short nap type breaks or for the whole night. Most people report a deeply relaxing sleep is enjoyed, although it will of course depend on the TSE you have used to charge the water you’ve sprayed your cocoon with. Again, a very quick guide for this is:
- CO2 – rebalancing
- Zinc – relaxing
- Copper – cleaning
- Shungite – clearing (EMF for example)
- Iron – more invigorating
This is a very simple, quick and immediate way to experience the TSE quality. We have various people with different conditions experimenting and feeding back information and we will update our website as the information flows back to us. Essentially, you the user are the initiator and the point of empowerment… nothing is being done to you. More investigations are underway and we will update our information from time to time.
If you’re stumped on how to get your Cocoon folded back up watch the video below.